M high energy vertical bead mill（sand mill）

Home > Product > Mills > Vertical bead mill （sand mill） > M high energy vertical bead mill（sand mill）

M high energy vertical bead mill（sand mill）

Introduction
Application
Features
Key benefits
Technical data

1.Product inlet from the top
2.Outer plus inner peg milling annulus
3.Power input by forced displacement of media in the range 0,2 - 1,5 mm
4.Predispersing zone
5.Internal media recirculation
6.Media separation by centrifuging
7.High efficiency cooling of rotor, outer and inner stator + bottom
8.Product discharge through removable protection screen on top of inner stator
9.Removal of protection screen without draining mill

Application
NC-printing Inks
Special liquid printing inks,
Tinting pastes for coatings
Inkjet

Nano product

Automotive refinish & OEM

Industrial multi-purpose coatings
Electronic paste

alumina
ceramic ink
coatings
Inkjet ink
lithium
nano-material
nitrile glove
Pharmaceutics

Features
outer + inner stator pegged
outer + inner stator cooled
cooled bottom
discharge screen in center
exchangeable liners

control panel
in packing
IngersoII Rand diaphragm pump
vertical bead mill

Key benefits
for difficult wet grinding tasks in recirculation mode
achievable particle size in the nano meter range for low to medium product
viscosity up to 1000 m Pa·s at
working condition small grinding chamber volume min. product lossduring product change perfect scal ability with constant
power density and specific
cooling surface area due to
annular geometry

Technical data

Model	Grinding Chamber Volume L	Power kW	Batch L	Max.tip speed M/S
M05	0.5	3	1-5	10-16
M2	2	5.5/7.5	3~20	10-16
M6	6	18.5/22	20-200	10-16
M15	16	45/55	150-1000	10-16
M30	30	75/90	150~2000	10-16
M60	60	160	300-3000	10-16

NC-printing Inks

Special liquid printing inks,

Tinting pastes for coatings

Inkjet

Nano product

Automotive refinish & OEM

Industrial multi-purpose coatings

Electronic paste

outer + inner stator pegged
outer + inner stator cooled
cooled bottom
discharge screen in center
exchangeable liners

for difficult wet grinding tasks in recirculation mode
achievable particle size in the nano meter range for low to medium product
viscosity up to 1000 m Pa·s at
working condition small grinding chamber volume min. product lossduring product change perfect scal ability with constant
power density and specific
cooling surface area due to
annular geometry

Model	Grinding Chamber Volume L	Power kW	Batch L	Max.tip speed M/S
M05	0.5	3	1-5	10-16
M2	2	5.5/7.5	3~20	10-16
M6	6	18.5/22	20-200	10-16
M15	16	45/55	150-1000	10-16
M30	30	75/90	150~2000	10-16
M60	60	160	300-3000	10-16

Product